Can I put my Bounce House on the Grass, Cement, or Gravel? (without popping it or ruining my grass!)

May 31, 2022

You've seen them at birthday parties, carnivals, and community events - those big, colorful bounce houses that seem to be everywhere these days. They're a hit with kids of all ages, but you may be wondering: can I put my bounce house on the grass, cement, or gravel?


The answer is yes - but there are a few things you need to keep in mind to make sure your bounce house doesn't get ruined, or worse, cause any damage.


Bounce houses are made of PVC vinyl, which is a sturdy but flexible material. This means that it can withstand a lot of wear and tear, but it's also susceptible to punctures and tears if it comes into contact with sharp objects.

Can you put a Bounce House on concrete?

The short answer is yes, you can put a bounce house on concrete. However, there are a few things you need to keep in mind to make sure your bounce house doesn't get ruined, or worse, cause any damage.


Bounce houses are made of PVC vinyl, which is a sturdy but flexible material. This means that it can withstand a lot of wear and tear, but it's also susceptible to punctures and tears if it comes into contact with sharp objects.

Protective Layer Under A Bounce House

One way to protect your bounce house from sharp objects is to lay down a tarp or other protective layer on the ground before setting up the bounce house. This will create a barrier between the concrete and the vinyl and will help to prevent any punctures or tears.


Another thing to keep in mind when setting up a bounce house on concrete is the surface itself. If the concrete is rough or has any sharp edges, this can also cause damage to the vinyl. It's important to inspect the surface before setting up the bounce house and make sure it's smooth and even.

Limitations to placing a bounce house on concrete

While you can technically put a bounce house on concrete, it's not always the best idea. Concrete can get very hot in the summer sun, which can make the bounce house uncomfortably warm for kids to play in. It's important to keep this in mind if you're planning on using the bounce house during the hotter months.

How can I secure my bounce house on concrete?

If you're planning on putting your bounce house on concrete, there are a few things you can do to secure it. One way is to use sandbags or water weights to anchor the bounce house down. This will help to keep it in place and prevent it from blowing away in the wind.


Another way to secure a bounce house on concrete is to use stakes. Stakes can be driven into the ground around the perimeter of the bounce house to keep it in place. However, it's important to make sure the stakes are made of a soft material like plastic or rubber so they don't damage the vinyl.

Anchoring A Bounce House

When you're putting a bounce house on any surface - whether it's concrete, grass, or gravel - it's important to anchor it down so it doesn't blow away in the wind. This will help to keep the bounce house stable and prevent any accidents.


There are a few ways to anchor a bounce house. One way is to use sandbags or water weights to hold it down. You can also use stakes to drive into the ground around the perimeter of the bounce house. Make sure that the stakes are made of a soft material, like plastic or rubber, so they don't damage the vinyl.

Level Terrain For A Bounce House

Another thing to keep in mind when setting up a bounce house is the terrain. It's important to make sure the surface is level before setting up the bounce house. If the surface is uneven, this can cause the bounce house to tip over or collapse.

Ideal Bounce House Location

The ideal location for a bounce house is on a level, grassy surface. This will provide a soft, stable surface for the bounce house and will help to prevent any damage.


If you don't have a grassy area, you can also put the bounce house on concrete, gravel, or sand. Just make sure to take the necessary precautions to protect the bounce house from sharp objects and the heat.

Bounce House Locations To Avoid

There are a few locations you should avoid when setting up a bounce house. One is near trees or other tall objects. The wind can catch the bounce house and blow it into these objects, causing damage to the bounce house and possibly injuring the kids inside.


Another location to avoid is near water. If the bounce house gets wet, it can become very slippery and dangerous for the kids. It's also important to avoid putting the bounce house on a slope, as this can also cause it to tip over.

Can a bounce house go on a road?

You should never put a bounce house on a road or any other surface with cars. This is because the bounce house can be easily blown away by a passing car.

Can Bounce Houses be used indoors?

Bounce houses can be used indoors, but there are a few things you need to keep in mind. First, the ceiling needs to be high enough so the bounce house doesn't hit it. Second, the floor needs to be completely level so the bounce house doesn't tip over. Finally, there should be no sharp objects nearby that could puncture the bounce house.

Can a Bounce House fit into a garage?

A bounce house can fit into a garage, but you need to make sure the garage is big enough. The bounce house needs to be able to fully inflate without hitting anything.

Can Bounce Houses Go On Concrete?

Bounce houses can go on concrete, but you need to take some precautions. First, make sure the surface is level so the bounce house doesn't tip over. Second, use sandbags or water weights to anchor the bounce house down. Finally, use stakes to secure the bounce house to the ground. This will help to prevent the bounce house from blowing away in the wind.

Can Bounce Houses Go On Grass?

Bounce houses can go on grass, but it's important to choose the right location. The surface should be level and free of any sharp objects that could puncture the bounce house. It's also a good idea to use sandbags or water weights to anchor the bounce house down.

Can Bounce Houses Go On Gravel?

Bounce houses can go on gravel, but you need to take some precautions. First, make sure the surface is level so the bounce house doesn't tip over. Second, use sandbags or water weights to anchor the bounce house down. Finally, use stakes to secure the bounce house to the ground. This will help to prevent the bounce house from blowing away in the wind.

Can I Put My Bounce House On The Grass, Cement Or Gravel? (without popping it or ruining my grass!)

You can put your bounce house on any surface - whether it's concrete, grass, or gravel - but it's important to anchor it down so it doesn't blow away in the wind. This will also help to prevent the bounce house from tipping over.

Other related questions

What is the Bounce House Rental Cost?

Wondering how much it costs to rent a bounce house? Check out our inflatable rentals or read our blog post we wrote called "Bounce House Rental Cost: How Much to Rent a Bounce House?"

What are the consequences of a bounce house not being properly anchored?

If a bounce house is not properly anchored, it can be blown away by the wind or even collapse. This can cause serious injuries to the kids inside.

How do I know if my bounce house is safe?

There are a few things you can look for to make sure your bounce house is safe. First, check the seams to make sure they're all sealed. Second, check the inflation tube to make sure there are no leaks. Finally, inspect the entire bounce house for any tears or punctures.

What should I do if my bounce house starts to deflate?

If your bounce house starts to deflate, turn off the power and remove the kids from the bounce house immediately. Then, check for any punctures or leaks. If you can't find the cause of the problem, contact the manufacturer for assistance.

A Protective layer

It's always a good idea to put a tarp or something else down before setting up your bounce house. This will help to protect the surface beneath from any punctures or tears.

Flat surface

When setting up your bounce house, make sure the surface is completely flat. This will help to prevent the bounce house from tipping over.

Proximity to the power source

Make sure the power source is nearby when setting up your bounce house. This will make it easier to inflate the bounce house and will also help to prevent any tripping hazards.

Larger location

When choosing a location for your bounce house, make sure it's large enough. The bounce house needs to be able to fully inflate without hitting anything.

Cleaning up afterward

Be sure to clean up any debris after using the bounce house. This will help to prevent injuries and keep the area looking nice.

Tips to keep in mind while anchoring the bounce house

  • Make sure the surface is level
  • Use sandbags or water weights to anchor the bounce house down
  • Use stakes to secure the bounce house to the ground
  • Inspect the bounce house for any punctures or leaks before use

Choice of flat surfaces

  • Grass
  • Concrete
  • Gravel

Conclusion: Can I Put My Bounce House on Concrete?

Bounce houses are a great way to keep kids entertained at parties and events. But before you set one up, it's important to know where you can and can't put it. Make sure to choose a level surface that's free of sharp objects, and anchor the bounce house down so it doesn't blow away in the wind. With these tips, your bounce house will be safe and fun for everyone! Don't want to do is yourself? Check out bounce house rentals in Sacramento, CA from Party Bouncers. They are a a certified party rental company.